Jans Electromate

 LWC Copper Tube refers to a copper tube that has a 2-inch outer diameter and is manufactured with a light wall thickness. These tubes are used in various applications, particularly in plumbing, HVAC systems, refrigeration, and other industrial uses where copper’s durability, conductivity, and resistance to corrosion are important.

Key Features of 2-inch LWC Copper Tubes:

1. Size and Dimensions:

   • Outer Diameter (OD): 2 inches.
   • Inner Diameter (ID): The inner diameter is determined by the tube's wall thickness, which is lighter than the standard or heavy-wall copper tubes. The wall thickness for LWC copper tubes is generally thinner, offering a balance of strength and cost efficiency.

2. LWC (Light Wall Copper):

   • LWC copper tubes have a thinner wall compared to standard copper tubes (like Type K, L, or M), making them lighter in weight and less expensive.
   • The reduced wall thickness means they have a higher internal capacity for fluids, gases, or refrigerants compared to thicker-walled copper tubing.
   • Despite being lighter, LWC tubes still provide excellent corrosion resistance and thermal conductivity due to copper's natural properties.

2 Inch LWC Copper Tube refers to a copper tube that has a 2-inch outer diameter and is manufactured with a light wall thickness. These tubes are used in various applications, particularly in plumbing, HVAC systems, refrigeration, and other industrial uses where copper’s durability, conductivity, and resistance to corrosion are important.

Key Features of 2-inch LWC Copper Tubes:

1. Size and Dimensions:

   • Outer Diameter (OD): 2 inches.
   • Inner Diameter (ID): The inner diameter is determined by the tube's wall thickness, which is lighter than the standard or heavy-wall copper tubes. The wall thickness for LWC copper tubes is generally thinner, offering a balance of strength and cost efficiency.

2. LWC (Light Wall Copper):

   • LWC copper tubes have a thinner wall compared to standard copper tubes (like Type K, L, or M), making them lighter in weight and less expensive.
   • The reduced wall thickness means they have a higher internal capacity for fluids, gases, or refrigerants compared to thicker-walled copper tubing.
   • Despite being lighter, LWC tubes still provide excellent corrosion resistance and thermal conductivity due to copper's natural properties.

1 Inch Round Copper Tube offered by us find usage in a variety of applications. With the minimum copper content of 99.9% as per IS-191, these copper tubes are also resistant to corrosion and feature superior mechanical strength.These tubes have the superior mechanical strength and provide for low-pressure loss. These are easy in installation, thus helping in achieving improved cost-effectiveness as compared with other metals. The deoxidized copper is also well suited to welding and brazing.Copper tubing is most often used for heating systems, and as a refrigerant line in HVAC systems.

1 Inch PVC Coated Copper Tube is a copper tube that has been coated with a layer of PVC (polyvinyl chloride) plastic. This type of tube is commonly used in a variety of applications, particularly in plumbing, electrical conduit, and refrigeration systems, where the added PVC coating provides benefits such as enhanced durability, corrosion resistance, and electrical insulation.

Key Features of 1-inch PVC Coated Copper Tube:

1. Size and Dimensions:

   • The outer diameter of the tube is 1 inch.
   • The inner diameter will depend on the wall thickness of the copper tube, which varies based on the specific type (e.g., Type K, L, or M copper).

2. PVC Coating:

   • The PVC coating typically covers the outside of the copper tube, providing an extra layer of protection against corrosion, abrasion, and impact.
   • It also serves as an insulator for electrical applications, preventing short circuits when used in electrical wiring installations.

Cupro Nickel 70/30 ASTM C71500
Chemical Composition -

• Cu-90
• Ni-10

Physical & Mechanical properties

• Tensile Strength – 54000 to 75000 psi(372 to 517MPa)
• Elongation 45.0%

Round Billet - OD 120 mm upto 650 mm

Rod - 8 mm OD to 100 mm , 100 m to 120 mm only extruded

Square & Hex - 10 mm to 80 mm A/F

Flat - Width 80 mm, Max Thickness – 15% of width

Profile - As require